company_intr

Lihlahisoa

OLED Display OHEM12864-05 SH1106G 128×64 1.3” I2C White PMOLED Display

Tlhaloso e Khutšoanyane:

Botenya ba phanele: 1.40mm
Diagonal A/A boholo: 1.30-inch


  • Boholo ba phanele:34.50 x 23.0 x 1.40mm
  • Sebaka se sebetsang:29.42 x 14.7mm (1.30-inch)
  • Panel matrix:128*64
  • Mmala:tšoeu
  • Mokhanni IC:SH1106G
  • Sehokelo:8-bit 68XX/80XX parallel, 4-terata SPI, I2C
  • Dot matrix:128 x 64 dot
  • Boholo ba matheba:0.21 x 0.21mm
  • Letheba la matheba:0.23 x 0.23mm
  • Sebaka se sebetsang:21.744 x 10.864mm
  • Boholo ba phanele:34.50 x 23.00mm
  • Lintlha tsa Sehlahisoa

    Li-tag tsa Sehlahisoa

    Melemo ea OLED

    Thin (ha ho hlokahale lebone la morao)

    Khanya e tšoanang

    Mefuta e mengata ea mocheso o sebetsang (lisebelisoa tsa boemo bo tiileng tse nang le thepa ea electro-optical e ikemetseng ho mocheso)

    E loketse video e nang le linako tse fetohang ka potlako(μs) oled

    Li-angles tse pharalletseng tsa ho shebella (~ 180 °) tse se nang phetoho e bohlooho

    Tšebeliso e tlase ea matla

    nako e telele ea bophelo

    Khanya e phahameng, Khanya ea Letsatsi e ka baloa

    OHEM12864-05

    OHEM12864-05 SH1106G 128×64 1.3 '' I2C White OLED Display e etsa hore e be khetho e nepahetseng bakeng sa mefuta e mengata ea likopo, ho tloha mererong ea DIY electronics ho lisebelisoa tsa setsebi.

    Ka qeto ea 128x64 pixels, OHEM12864-05 e fana ka litšoantšo tse hlakileng le tse hlakileng, ho netefatsa hore litaba tsa hau lia hlahella. Boholo ba lisenthimithara tse 1.3 bo etsa hore e be e loketseng merero e haelloang ke sebaka ha e ntse e fana ka litša tse ngata tsa skrineng bakeng sa ho bonts'a mongolo, lits'oants'o le litšoantšo. Theknoloji e tšoeu ea OLED ha e ntlafatse ponahalo feela empa e boetse e netefatsa tšebeliso e tlaase ea matla, e leng se etsang hore e be khetho e sebetsang hantle bakeng sa lisebelisoa tse sebelisoang ke betri.

    Khokahano ea I2C e nolofatsa khokahano, e lumella ho hokahana habonolo le li-micro-controller le liboto tsa nts'etsopele tse kang Arduino le Raspberry Pi. Tšobotsi ena e nolofalletsa puisano le taolo e se nang moeli, e etsa hore e fumanehe ho ba qalang le bahlahisi ba nang le phihlelo. Pontšo e boetse e tsamaisana le lilaebrari tse fapaneng, ho netefatsa hore u ka qala kapele le ka nepo.

    E hahiloe ka ho tšoarella kelellong, OHEM12864-05 e etselitsoe ho mamella mathata a ts'ebeliso ea letsatsi le letsatsi. Kaho ea eona e matla e tiisa nako e telele, ha tekanyo e phahameng ea phapang e fana ka mokhoa o babatsehang oa ho baloa maemong a fapaneng a mabone. Hore na o etsa sesebediswa se ikgethang, sesebediswa se ka aparoang, kapa pontsho e sebetsang.


  • E fetileng:
  • E latelang:

  • Ngola molaetsa wa hao mona mme o re romele wona